Hang Zhou Dawn Air Conditioning Co .,Ltd.

Automobile air conditioning condenser is air-cooled condenser.Require forced air flow to spread the heat of the condenser tube surface away. Condenser with good or bad effects is related itself's cooling capacity and ventilation.The former is determined by the structure, size, material and process, the latter driving wind and the size of fan ventilation capacity, condensing device placement and diversion measures around the condenser coils.
Limited by the size of car space, car condenser frontal area are often not enough. Therefore, requires to use condenser coil which heat transfer more efficient structure. As the car is moving objects, there are strict requirements on weight, so basically small and medium sized automotive air conditioning use aluminum structure. Also, because the car's speed bumps running condition, the condenser coils structure, good seismic performance.
Limitations due to its location on the vehicle, the arrangement of the condenser is very difficult, and the cooling in poor condition. Under normal circumstances, the condensing pressure of 1.5 ~ 1.6 MPa. General room air conditioner condenser heat load,the cooling capacity usually about 1.2 times. But car air conditioners, the condenser must be considered poor working conditions, this ratio is about 1.4, even 1.6, so in order to make the condenser has sufficient cooling capacity.
Automobile air conditioning condenser, arranged in the car most of the head, side (front back), or vehicle, there are arranged on the roof. For installation in the car at the end of the condenser should be additional protective nets to prevent splashing up the sand Jihuai ground condenser. For the layout of the front wheel behind the condenser coils should be out front taking into account the impact of dust on the condenser: the arrangement of the condenser on the roof, to consider the row of the rains.
The ways of placing condenser have a lot:The common way is to install the condenser of the front of engine water tanks.Both them are overlapping arrangement. Radiator fan and car travel by air for cooling: In this way,sometimes can affect the normal operation of the tank, thereby it will affect the engine performance.