Language:
You are here: Home >> News >> The installation and using of the plate heat exchanger

News

The installation and using of the plate heat exchanger

2011/6/27

According to the plate heat exchanger saddle bracket,there are divided into two kinds of installation. The first, for no saddle bracket in support,plate heat exchanger should be installed iracket which built of brick.After installation it need not fix by basic.The whole board change can be fixed with the change of the expansion move freely. The second, to saddle type support board change, should first based on concrete tile in dry, wait for after completely anchor bolt will saddle type bearings and ground concrete is completely fixed up.
Installed in the process of plate heat exchanger, should be in heat exchanger ends before and after set aside enough space to maintain and clean. Heat exchanger in the provisions shall not be more than nameplate condition for heat exchanger, the medium temperature and pressure to see and analysis, prevent heat exchanger appear abnormal operation.
The heat exchanger heat transfer effect and scale has the very big relations, scale, the more heat effect of the more is not ideal. So, for the heat of the scale to timely cleaning. Avoid fouling too much influence heat transfer effect.
 

Contact Us







Contact Us

Send Results

Thank you ! The Message is Send.
We will contact you as soon as possible and offer you the corresponding services!

Send Results

Sorry, The message don't send, Service don't work now.