Language:
You are here: Home >> News >> The ues ways of Condenser

News

The ues ways of Condenser

2010-12-30

Condenser tube from the inside and outside the portfolio composition of the upper and lower sides of its external tube connecting pipe joints were used as inlet and outlet. Condenser should be in use by the lower end of the connector to the plastic tube connected to the taps, as the inlet. Because the temperature of the intake was lower after the water vapor heated, high temperature; more hot water because of density reduction will automatically flow up to help cool the water cycle. Condenser is often used in situations like an experiment in returning the flask or the like to collect condenser coils on the liquid after distillation bottle. Occurrence of vapor condensation on the inner wall of inner pipe. Inside and outside the tube, compared with the space enclosed by a line of steam heat the water district has absorbed and the heat removal function. Water inlet usually have high water pressure, in order to prevent water loss, the plastic tube bundle should be secured. When used in the reflow state, the lower end of condenser tube to insert a rubber stopper to the flask can be inserted into the mouth, following up the evaporation of the steam inside the flask.
Reflux heat exchanger: a volatile liquid reactants, the reactants in order to avoid losses and make full use of raw materials, device design to reflux condensation in the event of device, so that the material through condensation from the gas back to liquid, so back and collect. Laboratory equipment can be installed in the event of a long glass tube or tubes to achieve reflux
 

Contact Us







Contact Us

Send Results

Thank you ! The Message is Send.
We will contact you as soon as possible and offer you the corresponding services!

Send Results

Sorry, The message don't send, Service don't work now.