Hang Zhou Dawn Air Conditioning Co .,Ltd.

•Heat exchanger are developed to enhance the proficiency at which heat is exchanged in the device. Heat exchangers are utilized in the assortment of disciplines, that consist of aerospace, substance processing, hydraulics, essential oil cooking and energy generation. because heat could be dangerous, heat exchangers should stick to many different specifications to turn out to be completely risk-free and effective for that consumers.
Heat Transfer
•Some heat exchangers shift heat by method of air, while other heat exchangers shift heat by method of water, in accordance with around the earth Spec.
Cooling
•Heat exchangers are usually air-cooled. An electric powered engine or fluid-powered admirer removes heat by method of the exchanger in which that heated oxygen could be cooled, in accordance with around the earth Spec.
Plate Heat Exchangers
•Plate heat exchangers are utilized once the heating demands for that unit are under 150 degrees Celsius. The gasket mind should be developed away from components in a location to deal with the heating components which could deal with the temperatures the heat exchanger operates below and should also possess the ability to deal with the fluids utilized from the plate heat exchanger, which usually suggests the fact that exchanger is gasketed, brazed, welded as well as a semi-welded type.
Scraped Surfaces
•Some heat exchangers are scraped surface area heat exchangers. They are jacketed cylinders which should have rotating rows of scraper blades. Heating and cooling mediums are circulated by method of each the cylinder as well as the insulating jacket.
Shell and Tube
•Shell and tube heat exchangers come about in U-tube, straight, spiraled or finned tubes. The U-tube should have straight-length tubes bent in U shapes. The spiral heat exchanger should be developed away from two metal strips that occur to be wound near to the center of two spiral channels.
Door Heat Removal
•The doorway heat removal ability in the heat exchanger should enhance once the consuming water temperatures decreases, the consuming water flow raises as well as the server heat fill decreases, in accordance with IBM.
Dew phase Control
•When the heat exchanger has no dew phase deal with available, a temperatures of 18 degrees Celsius should be maintained in any way times, in accordance with IBM.
Brazing Materials
•The brazing components utilized for heat exchangers are both copper, nickel or CuproNickle. The plate components are both developed away from stainless metal or marine-grade stainless steel, in accordance with WCR.
Quality Control
•The ports and accomplish plates in the heat exchanger should be brazed. The accomplish caps of those should be soldered with 95/5 tin/antimony, in accordance with Thermo-Dynamics.com. The heat exchangers should be pressure-tested to 75 pounds every rectangular inch (psi) inside the shell facet in the heat exchanger and 150 psi inside the tube facet to make certain the heat exchanger will not have leaks.