News
-
The working principle of the evaporator
Cooling air discharge tube is used to cool an evaporator coils. Widely used in cold storage library, the refrigerant discharge pipe in the cooling flow and evaporation, heat transfer medium outside the tube is cooled as air for natural convection. Cooling discharge tubes of the biggest advantages of simple structure, easy production, storage of the Treasury caused by the non-packaged foods consu...
-
The ues ways of Condenser
Condenser tube from the inside and outside the portfolio composition of the upper and lower sides of its external tube connecting pipe joints were used as inlet and outlet. Condenser should be in use by the lower end of the connector to the plastic tube connected to the taps, as the inlet. Because the temperature of the intake was lower after the water vapor heated, high temperature; more hot wat...
-
Explained the reasons for cleaning heat exchanger
Clean production processes in the chemical industry, due to many reasons, heat exchanger and pipe line equipment, will have a lot of lines such as coke, oil and dirt, scale, sediment, corrosion products, polymers, fungi, algae, Sticky mud and other dirt. These devices produce dirt and pipe lines will fail, the device will occur decline in production systems, energy consumption, material consumpti...
-
The working principle of heat exchanger
Heat exchanger is mainly used for drying air heating systems, hot air device is the main equipment used in heat sink media can be steam or hot water, can also be heat-conducting oil, vapor pressure of work no more than 0.8Mpa, hot air Temperature below 150 ℃. Finned heat sink from the air flow between the main three rows of parallel finned tubes formed, SRZ fin tube bundle type heat processing t...
